Suitable for
Projects that match this page decision
- New-machine projects freezing a PET bottle format
- Multi-SKU projects that need a format matrix
- Replacement projects checking existing transfer geometry
Engineering evidence / controlled bottle drawing
PET Bottle Drawing Requirements for Filling Machine Review
A volume label is not enough to design bottle handling. Submit a revision-controlled bottle drawing and identify the physical samples that match it before guides, grippers, starwheels or change parts are confirmed.
Answer first
The drawing package should identify overall height and diameter, body geometry, neck finish, support-ring geometry, empty-bottle weight, base shape and revision status. Each physical sample should be traceable to that drawing and to the cap it will use.
Drawing control / bottle evidence
A bottle drawing should answer machine-design questions
Treat the drawing, sample and SKU identity as one controlled evidence set.
| Required field | Evidence to submit | Machine decision supported |
|---|---|---|
| Overall envelope | Height, maximum diameter or width, base geometry | Guides, clearance and transfer stability |
| Neck finish | Dimensioned finish and thread detail | Rinser grip, cap match and handling |
| Support ring | Diameter, thickness and position | Air-conveyor and neck-transfer contact |
| Bottle construction | Material, empty weight and critical body features | Handling sensitivity and sample review |
| Revision identity | Drawing number, revision, date and SKU | Change control and sample traceability |
| Physical evidence | Labeled bottle and matching cap samples | Validation against the drawing before design freeze |
Reference values require project-specific confirmation. A complete drawing package enables engineering review; it does not by itself guarantee compatibility.
Not suitable for
Boundaries that need a different platform or review
- Submitting only bottle volume or a marketing photograph
- Treating an unapproved sample as the production standard
- Assuming similar-looking necks and caps are interchangeable
Inputs required
Evidence to provide before confirmation
- Dimensioned bottle drawing with units and revision
- Neck-finish and support-ring detail
- Empty-bottle weight, material and base geometry
- Labeled bottle and cap samples that match the drawing
Machine function
What happens at this machine or decision boundary
- Create one controlled geometry reference for machine review.
- Link each SKU, bottle sample and cap sample to a revision.
- Identify which handling parts are common and which require confirmation.
Configuration decisions
Options that must appear in the proposal
- Primary production bottle and allowable format range
- Neck-handling points through infeed, rinser and transfers
- Dedicated guides, starwheels or other change parts
Interface requirements
Upstream, downstream and utility handovers
- Air-conveyor support height and entry direction
- Rinser grip and transfer contact points
- Filled-bottle discharge stability and downstream handover
Buyer risks
Questions to close before order
- A sample and drawing from different revisions
- Missing support-ring or neck-finish dimensions
- Approving machine parts before the production bottle is frozen
FAT checks
How to verify the agreed basis
- Use samples identified by SKU and drawing revision.
- Observe marks, tipping, jams and transfer stability at agreed conditions.
- Record any approved adjustment or replacement part against the revision.
Quotation scope
What the commercial offer should state
- Bottle schedule and drawing revisions reviewed
- Samples received and unresolved dimensions
- Included format parts and adjustment scope
- Change-control rule after design approval
Search questions / buyer answers
Questions buyers ask before requesting a quotation
What information is required before confirming PET Bottle Drawing Requirements for Filling Machine Review?
Dimensioned bottle drawing with units and revision. Neck-finish and support-ring detail. Empty-bottle weight, material and base geometry. Labeled bottle and cap samples that match the drawing.
What should the quotation state for PET Bottle Drawing Requirements for Filling Machine Review?
Bottle schedule and drawing revisions reviewed. Samples received and unresolved dimensions. Included format parts and adjustment scope. Change-control rule after design approval.
How should PET Bottle Drawing Requirements for Filling Machine Review be checked during FAT?
Use samples identified by SKU and drawing revision. Observe marks, tipping, jams and transfer stability at agreed conditions. Record any approved adjustment or replacement part against the revision.
Related decision
Selection Tools
Calculate preliminary required BPH from daily saleable bottles, net hours, planning efficiency and growth reserve, then compare an XGF reference band.
Allot Tech / pet-bottle-drawing-requirements
Turn this decision into a comparable machine scope
Send the bottle, cap, reference output, existing equipment and destination. Final values are confirmed in the project proposal.