Suitable for
Projects that match this page decision
- Non-carbonated purified, mineral, spring or drinking water
- PET bottles approved for the selected filling and transfer method
- Projects with a defined treated-water supply condition
Zone 02 / product filling
Normal-Pressure Water Filling Section
Normal-pressure filling is a reference platform for still water, but stable performance depends on the treated-water boundary, bottle geometry, operating conditions and an agreed test method.
Answer first
Specify the product-water supply and reference bottle together. A quotation should state where the supplier scope begins, whether a product-water tank or pump is included, and how fill level, output and leakage will be judged during FAT.
Not suitable for
Boundaries that need a different platform or review
- Carbonated water or beverages requiring pressure filling
- Hot-filled juice or tea without a separately engineered platform
- Projects expecting one reference speed across all bottle sizes
Inputs required
Evidence to provide before confirmation
- Water type and treatment status
- Supply-tank, level, pressure and piping boundary
- Bottle geometry and target fill presentation
- Reference output and test duration
Machine function
What happens at this machine or decision boundary
- Approved bottles are transferred into the filling carousel.
- Product water is delivered through the confirmed normal-pressure filling arrangement.
- Filled bottles leave at a controlled level for immediate cap placement.
Configuration decisions
Options that must appear in the proposal
- Product-water tank, pump and piping inclusion
- Filling-valve and station configuration
- Operating speed by bottle format
- Drainage, cleaning access and hygienic boundary
Interface requirements
Upstream, downstream and utility handovers
- Define the last treated-water component before the machine.
- Confirm pipe size, connection, control signal and supply stability.
- Coordinate filled-bottle transfer with capping and outfeed conditions.
Buyer risks
Questions to close before order
- Unstable level caused by an undefined upstream supply
- Bottle deformation or splash at unsuitable speed
- Comparing output figures without matching the reference container
FAT checks
How to verify the agreed basis
- Measure actual output and saleable bottles for the agreed period.
- Inspect fill-level consistency and leakage under steady operation.
- Test start, stop, starvation and restart conditions.
Quotation scope
What the commercial offer should state
- Filling principle and number of stations
- Product-water boundary, tank, pump and piping scope
- Reference bottle and output basis
- FAT measurement and acceptance criteria
Allot Tech / normal-pressure-water-filling
Turn this decision into a comparable machine scope
Send the bottle, cap, reference output, existing equipment and destination. Final values are confirmed in the project proposal.