Skip to content
PET STILL-WATER MACHINE SELECTION DESK US +1 818 262 0958WhatsApp +86 186 6213 1120
XGF Allot TechFilling machine center

Catalog model / exact-capacity search intent

XGF24-24-8 13,000 BPH Bottled Water Filling Machine

The Allot Tech catalog lists XGF24-24-8 at 13,000 BPH on a 500 ml reference basis, with published size L2800 × W2230 × H2700 mm, weight 4,800 kg and machine power 3.92 kW.

Confirm XGF24-24-8 for My BottleWhatsApp +86 186 6213 1120
XGF24-24-8 13,000 BPH Bottled Water Filling Machine - XGF bottled water rinsing filling and capping monoblock reference machine
Allot Tech 2026 catalog imageReference values require project-specific confirmation.
Answer first

XGF24-24-8 is a preliminary reference for buyers planning around 13,000 bottles per hour at 500 ml. Confirm the actual PET bottle, cap, saleable-output target, utilities and interfaces before treating it as the final machine selection.

Reference values require project-specific confirmation.

XGF24-24-8 13,000 BPH Bottled Water Filling Machine

XGF24-24-8 is a preliminary reference for buyers planning around 13,000 bottles per hour at 500 ml. Confirm the actual PET bottle, cap, saleable-output target, utilities and interfaces before treating it as the final machine selection.

Reference model
XGF24-24-8
Published output
13,000 BPH
Published size
L2800 × W2230 × H2700 mm
Published weight
4,800 kg
Published machine power
3.92 kW
Container basis
500 ml — Reference values require project-specific confirmation.
01

Suitable for

Projects that match this page decision

  • PET still-water projects whose preliminary 500 ml requirement is near 13,000 BPH
  • Buyers comparing an XGF rinsing-filling-capping monoblock with a defined interface scope
  • Teams that can provide bottle, cap, utilities and destination data for confirmation
02

Not suitable for

Boundaries that need a different platform or review

  • Applying the 13,000 BPH reference unchanged to 1.5 L or 2 L bottles
  • Carbonated, hot-fill, glass, can or returnable 5-gallon platforms
  • Using the model code as proof of final components, materials or commercial scope
03

Inputs required

Evidence to provide before confirmation

  • Bottle volume, drawing, neck finish, support ring and physical samples
  • Cap drawing, cap sample, feeding method and acceptance check
  • Required saleable BPH, daily hours, efficiency basis, growth reserve and destination
04

Machine function

What happens at this machine or decision boundary

  • The monoblock combines PET bottle rinsing, normal-pressure water filling and screw capping.
  • The published 13,000 BPH value provides an initial 500 ml capacity band.
  • Project engineering confirms format handling, actual output, components and interface responsibility.
05

Configuration decisions

Options that must appear in the proposal

  • Whether XGF24-24-8 has enough project-specific output reserve
  • Which bottle formats, change parts, cap handling and controls are included
  • Whether the order covers the machine only, machine interfaces or a broader line scope
06

Interface requirements

Upstream, downstream and utility handovers

  • Empty-bottle air conveyor and monoblock inlet elevation
  • Treated-water tank, pump, piping and control handover
  • Filled-bottle discharge, accumulation and downstream labeling or packing route
07

Buyer risks

Questions to close before order

  • Comparing catalog BPH values that use different bottle or efficiency assumptions
  • Ignoring the published machine size, access route and maintenance clearance
  • Assuming conveyors, treatment, packaging, installation or freight are included when unstated
08

FAT checks

How to verify the agreed basis

  • Run approved production-representative bottles and caps under the written test method.
  • Record continuous run time, actual output, stops, fill level, leakage and cap result.
  • Verify alarms, transfers, parts, documents and open points before shipment release.
09

Quotation scope

What the commercial offer should state

  • Reference model XGF24-24-8 and the agreed output basis
  • Published reference size L2800 × W2230 × H2700 mm, weight 4,800 kg and power 3.92 kW
  • Included conveyors, cap system, change parts, spares, controls and documents
  • FAT, installation, packing, freight, exclusions and project confirmation items

Search questions / buyer answers

Questions buyers ask before requesting a quotation

What information is required before confirming XGF24-24-8 13,000 BPH Bottled Water Filling Machine?

Bottle volume, drawing, neck finish, support ring and physical samples. Cap drawing, cap sample, feeding method and acceptance check. Required saleable BPH, daily hours, efficiency basis, growth reserve and destination.

What should the quotation state for XGF24-24-8 13,000 BPH Bottled Water Filling Machine?

Reference model XGF24-24-8 and the agreed output basis. Published reference size L2800 × W2230 × H2700 mm, weight 4,800 kg and power 3.92 kW. Included conveyors, cap system, change parts, spares, controls and documents. FAT, installation, packing, freight, exclusions and project confirmation items.

How should XGF24-24-8 13,000 BPH Bottled Water Filling Machine be checked during FAT?

Run approved production-representative bottles and caps under the written test method. Record continuous run time, actual output, stops, fill level, leakage and cap result. Verify alarms, transfers, parts, documents and open points before shipment release.

Related decision

Selection Tools

Calculate preliminary required BPH from daily saleable bottles, net hours, planning efficiency and growth reserve, then compare an XGF reference band.

Related decision

Compare all nine published XGF reference models

Continue to the related decision →

Allot Tech / xgf24-24-8-13000bph-bottled-water-filling-machine

Turn this decision into a comparable machine scope

Send the bottle, cap, reference output, existing equipment and destination. Final values are confirmed in the project proposal.

Submission is sent to sales@allottech.com. Personal form values are not sent to Google Analytics.